|
|||||||
| Hobby Lobby What do you do with your free time? Reading, writing, scrapbooking, art, crafts and more! |
![]() |
|
|
Thread Tools |
|
|
#1 (permalink) |
|
Family is complete again :)
![]() ![]() Join Date: Jun 2008
Location: Fort Wainwright, Alaska
Posts: 3,610
Classifieds: (3)
Activity: 37%
Longevity: 24%
|
Supplies needed:
1/16th circle punch Brads - 3 12x12 sheet of double sided paper Stampin' Dimensionals Adhesive Roller The first step to making these wonder bows is to take your 12x12 sheet of paper and cut seven 1" strips. Now take four of those 1" strips and cut them at 6" ( cut your 1"x12" in half). You will end up with eight 1"x6" strips. Take two more strips and cut then at 5" twice so you get four 1"x5" strips. With your remaining strip you wan to cut it at 4" so you have a 1"x4" strip. Set your scraps aside. ![]() You will have side A and side B. Side A is my purple and side B is my white polka dotted paper. Apply adhesive to one end on each strip. DO NOT fold your 1"x4" strip. Fold as shown below : ![]() Once all strips are folded punch a hole at the bottom of all of the strips once again not including your 1"x4" strip. Take your side A strips and insert a brad through them all to where they make your first layer of your bow like this : ![]() Do this again with all three layers (side B, then once again with side A). Once they are all put together with your brad take your side B layer and put Stampin' Dimensionals on the bottom like this : ![]() and attach to your first side A bottom layer like this : ![]() Repeat once more with your last side A layer as shown here : ![]() Once that step is complete, with your remaining 1"x4" piece roll in a loop like this : ![]() Apply Stampin' Dimensionals on the that roll and place in the middle of your third layer like this : ![]() Enjoy ![]() Additional Samples :
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|
|